Simultaneous Data Transmission Research Articles

Dense Wavelength Division Multiplexing (DWDM) in IT Networks: A Leap Beyond Synchronous Digital Hierarchy (SDH)

The evolution of telecommunications has seen significant milestones, notably the shift from Synchronous Digital Hierarchy (SDH) to Dense Wavelength Division Multiplexing (DWDM). This transition marks a pivotal advancement in the performance of Information Technology (IT) networks, offering unparalleled improvements in bandwidth, scalability, and efficiency. DWDM technology enables the simultaneous transmission of multiple data streams across a single optical fiber by using different wavelengths of light, significantly enhancing data throughput and network capacity. This article delves into the technical foundations of DWDM, compares its performance enhancements over SDH systems, and explores its impact on modern IT network infrastructure.

MR signature matching (MRSIGMA) implementation for true real-time free-breathing volumetric imaging with sub-200 ms latency on an MR-Linac.

Develop a true real-time implementation of MR signature matching (MRSIGMA) for free-breathing 3D MRI with sub-200 ms latency on the Elekta Unity 1.5T MR-Linac. MRSIGMA was implemented on an external computer with a network connection to the MR-Linac. Stack-of-stars with partial kz sampling was used to accelerate data acquisition and ReconSocket was employed for simultaneous data transmission. Movienet network computed the 4D MRI motion dictionary and correlation analysis was used for signature matching. A programmable 4D MRI phantom was utilized to evaluate MRSIGMA with respect to a ground-truth translational motion reference. In vivo validation was performed on patients with pancreatic cancer, where 15 patients were employed to train Movienet and 7 patients to test the real-time implementation of MRSIGMA. Dice coefficients between real-time MRSIGMA and a retrospectively computed 4D reference were used to evaluate motion tracking performance. Motion dictionary was computed in under 5 s. Signature acquisition and matching presented 173 ms latency on the phantom and 193 ms on patients. MRSIGMA presented a mean error of 1.3-1.6 mm for all phantom experiments, which was below the 2 mm acquisition resolution along the motion direction. The Dice coefficient over time between MRSIGMA and reference contours was 0.88 ± 0.02 (GTV), 0.87 ± 0.02(duodenum-stomach), and 0.78 ± 0.02(small bowel), demonstrating high motion tracking performance for both tumor and organs at risk. The real-time implementation of MRSIGMA enabled true real-time free-breathing 3D MRI with sub-200 ms imaging latency on a clinical MR-Linac system, which can be used for treatment monitoring, adaptive radiotherapy and dose accumulation mapping in tumors affected by respiratory motion.

Communication architecture and operations for SDR-enabled UAVs network in disaster-stressed areas

The article presents a collaboration and communication architecture for disaster stressed areas where communication losses restrain disaster response and perplex rescue operations. In these areas, the fragile access networks such as cellular or Wi-Fi systems become congested or inaccessible, requiring a reliable emergency communication infrastructure. The proposed architecture involves Unmanned Aerial Vehicles (UAVs), equipped with wireless technologies i.e., 3G/4G/5G/Wi-Fi systems, and manifestly Software Defined Radios (SDRs), enabling self-forming, self-organizing, and self-healing capabilities. The architecture uses a Hybrid Connectivity Module (HCM) which empowers cooperative communication capacities and abridge the technologies to achieve reliable communication link between UAVs, mobile-to-UAV, and UAV-to-mobile towards Ground Control Station (GCS) in catastrophic areas. The seamless connectivity via next generation SDR waveforms and designed algorithms ensure an implementation of versatile multi-user UAVs network. This enables the formation of a backbone network assisting ground devices to communicate GCS. For cooperative communication, the architecture provides a MAC-centric cross-layer protocol which offers efficient multihop routing between UAVs. The data (i.e., text, images, or voice) is routed to devices or GCS via UAVs, which can notify rescue services reliably and help to trace the catastrophic zones. Furthermore, the protocol helps to allocate network resources by creating virtual sub-nets for simultaneous interference-free data transmissions which maximizes the network throughput. The experimental results show the data latency far better than any other existing ad hoc routing protocol (e.g., OLSR or AODV) based designs which usually add delays in the emergency response operations.

MagSonic: Hybrid Magnetic-Ultrasonic Wireless Interrogation of Millimeter-Scale Biomedical Implants With Magnetoelectric Transducer.

Wireless interrogation (power and data transfer) of biomedical implants, miniaturized to millimeter (mm) dimensions, is critical for their chronic operation. Achieving simultaneous wireless power and data transfer at deep sites reliably within safety limits for closed-loop sensing/actuation functions of mm-sized implants is challenging. To enable this operation, a hybrid magnetic-ultrasonic interrogation approach (called MagSonic) is realized through a single magnetoelectric (ME) transducer at the implant that can generate and receive both magnetic field and ultrasound. The fabricated mm-sized bar-shaped ME transducer (5.2×2×1.6 mm3) operates at acoustic wave resonance, functioning at sub-MHz frequencies. For the first time, we demonstrate wireless power reception through one modality (magnetic field or ultrasound) and simultaneous uplink data transmission using the other. At 40 mm depth, the MagSonic link could achieve 100 kbps uplink data rate (bit error rate ≤ 10-5) using 190 pJ/bit transmitted energy and 8 mW delivered power in tissue. The robustness of the MagSonic interrogation link against power carrier interference and misalignments is also demonstrated.

Novel Modification of Integrated Optimization Method for Sensor's Communication in Wi-Fi Public Networks.

A novel modification of IP networks integrated optimization method for heterogeneous networks, for example, the seamless Wi-Fi network serving simultaneously mobile users and wireless sensors, has been developed in this article. The mutual influence of signal reception, frequency-territorial planning, and routing procedures in heterogeneous networks have been analyzed in the case of simultaneous data transmission by both mobile users and wireless sensors. New principles for the listed procedures interaction and the basic functions for their describing are formulated. A novel modification of the integrated optimization method and its algorithm have been developed. The developed method's effectiveness has been analyzed for the IEEE 802.11ax network segment. Its result showed that the network load was decreased by an average of 20%, the data rate over the network as a whole increased for users and sensors by an average of 25% and 40%, respectively, and the sensors' lifetime increased by an average of 20% compared to the novel modification of the Collective Dynamic Routing method.

Optical fiber gas sensor with multi-parameter sensing and environmental anti-interference performance

Formic acid finds widespread applications in numerous fields, including the petrochemicals production, rubber industry, and leather tanning process, in which the operational environments are complex and diverse. The corresponding industrial systems are often intricate and highly integrated. Indeed, formic acid gas is insidious and poses a hazard to both operating personnel and industrial equipment. The existing detection technologies for formic acid gas suffer from inherent technical limitations, making it challenging to effectively shield against industrial interference in complex environments while accurately conveying information. Furthermore, the simultaneous transmission of essential environmental data alongside formic acid gas concentration remains a formidable challenge, which is crucial for facilitating the integration and simplification of industrial system. In response to the aforementioned challenges, this research firstly employs an optical fiber structure (SNS: single mode fiber-no-core fiber-single mode fiber) with natural resistance to electromagnetic interference as the substrate. Subsequently, considering the characteristics of spectral variations and the response mechanism of formic acid gas, and addressing the issue of humidity interference of the current-stage sensors based on sensitive material, the chitosan and chitosan@PDMS are chosen as sensitive membranes. Finally, a correction formula was introduced to address the temperature and humidity coupling issue of the sensor, resulting in the successful development of two formic acid gas sensors. The chitosan-based sensor has a detection sensitivity of up to 7.7 pm/ppm, whose dual parameter detection performance for temperature and formic acid gas has been experimentally demonstrated. It can also correct the humidity-induced detection error in real-time by the correction formula. The chitosan@PDMS-based sensor was fabricated by plating a hydrophobic and breathable PDMS membrane on the surface of the chitosan-based sensor. In addition to maintaining the performance compared to the original sensor (response and recovery time was increased), the latter sensor can effectively resist the humidity interference from the environment. Furthermore, the new capability has been complemented for the simultaneous detection of temperature and humidity. That is, it realizes the dual parametric detection for formic acid gas and humidity, meanwhile providing the compensation ability for temperature change. The proposed sensors have the outstanding sensitivity, selectivity, immunity, and safety. This research not only effectively resolves the interference problem in formic acid gas detection, but also provides a new idea for equipment simplification and information integration in complex industrial systems.

Simultaneous transmission of time-frequency and data with co-amplification over urban fiber links

Simultaneous transmission of time-frequency and data with co-amplification over urban fiber links

A Wearable Real-Time System for Simultaneous Wireless Power and Data Transmission to Cortical Visual Prosthesis.

Wireless, miniaturised and distributed neural interfaces are emerging neurotechnologies. Although extensive research efforts contribute to their technological advancement, the need for real-time systems enabling simultaneous wireless information and power transfer toward distributed neural implants remains crucial. Here we present a complete wearable system including a software for real-time image capturing, processing and digital data transfer; an hardware for high radiofrequency generation and modulation via amplitude shift keying; and a 3-coil inductive link adapt to operate with multiple miniaturised receivers. The system operates in real-time with a maximum frame rate of 20 Hz, reconstructing each frame with a matrix of 32×32 pixels. The device generates a carrier frequency of 433.92 MHz. It transmits the highest power of 32 dBm with a data rate of 6 Mbps and a variable modulation index as low as 8 %, thus potentially enabling wireless communication with 1024 miniaturised and distributed intracortical microstimulators. The system is primarily conceived as an external wearable device for distributed cortical visual prosthesis covering a visual field of 20 °. At the same time, it is modular and versatile, being suitable for multiple applications requiring simultaneous wireless information and power transfer to large-scale neural interfaces.

A High-Misalignment-Tolerant and Extensive Vertical Adaptation Combined Simultaneous Transmission of Power and Data for WPT System

A High-Misalignment-Tolerant and Extensive Vertical Adaptation Combined Simultaneous Transmission of Power and Data for WPT System

Simultaneous dual-channel data transmission through a multimode fiber via wavefront shaping

The increasing demand for transmission capacity in fiber-optic communications makes multimode fibers (MMFs) attractive by enabling simultaneous multi-channel data transmission. However, inherent mode crosstalk among transmission channels limits its applicability. In this Letter, we propose to overcome this problem via wavefront shaping. By actively modulating the incident light with a special wavefront, not only the transmitted power for a specific channel can be enhanced but also crosstalk among different transmission channels can be mitigated. As a proof of concept, we experimentally demonstrated wavefront shaping assisted dual-channel optical communications through a single MMF. 10 Gbaud four-level pulse amplitude modulation signals were sent through both channels simultaneously, enabling a total bit rate of 40 Gbps. Both channels were analyzed with bit error rates below the hard-decision forward error correction limit, confirming the validity of the proposed scheme.

Mode Coupling in Mode Division Multiplexing techniques for futuristic high speed optical networks and exploring optical fiber parameters to control mode coupling

Fiber optic communications are inevitable to achieve higher data rates of modern telecom networks. After utilization of Wavelength division multiplexing, higher order modulations and polarization multiplexing, mode division multiplexing is a new dimension to achieve higher transmission capacity for optical fiber communication links. Different spatial distributions of optical energy along cross sectional area of optical fiber allows simultaneous transmission of data by considering each mode as an independent channel. During such simultaneous transmissions, possibility of mixing of signals amongst modes causes signal degradations and acts as limiting factor for bandwidth – distance product of the link. This effect of mode coupling has been explored in this article by presenting its mathematical formulations. A simulation has been performed to study the impact of fiber constructional parameters on mode coupling using optical wavelengths used for telecommunication systems. The observations help to develop fibers for reduced mode coupling for particular group of modes and operating wavelengths. This article paves the way forward for study of mode coupling in micro and macro bending conditions for forthcoming research endeavours.

Photonics-enabled joint communication-radar system with improved detection performance and looser symbol length limitation based on resampling and phase compensation

A photonics-enabled joint communication-radar (JCR) system by employing a multiple phase-shift keying (MPSK)-sliced linearly frequency-modulated (LFM) signal for simultaneous range measurement, microwave imaging, and data transmission is proposed and experimentally demonstrated with improved detection performance and looser symbol length limitation. A two-stage modulation in conjunction with optical filtering is utilized at the radar transmitter for the generation of the frequency-and-bandwidth-multiplied MPSK-sliced LFM signal while resampling and phase compensation operations are introduced at the radar receiving end to break the detection performance limitation induced by the communication symbol length when MPSK-sliced LFM signal is used. We demonstrate the concept experimentally. BPSK-sliced and QPSK-sliced LFM signals centered at 12 GHz are generated for JCR systems. When the time difference between the radar echo and the de-chirping reference is close to or greater than one symbol length, range measurement and microwave imaging that are hard to be fulfilled due to the random phase jumps of the de-chirped signal can be successfully realized via resampling and phase compensation. Experiments show that the proposed resampling and phase compensation method is valid for improving radar detection performance and loosening the communication symbol length limitation. Data communication with a data rate of up to 400 Mbps and ISAR imaging with a radar signal bandwidth of 1 GHz are successfully realized.

An Overview of MAC Scheduling techniques in 5G-NR

The advent of 5G technology has brought about a paradigm shift in wireless communication, enabling unprecedented data rates, ultra-low latency, and massive connectivity. At the heart of this technological revolution lies the 5G New Radio (5G-NR) standard, a key component that facilitates the seamless interaction between devices and networks. Within the 5G-NR architecture, the Medium Access Control (MAC) layer plays a pivotal role in optimizing the utilization of radio resources and ensuring efficient data transmission. This comprehensive overview delves into the intricate realm of MAC scheduling techniques within the context of 5G-NR. Scheduling, a fundamental aspect of wireless communication, is the process through which resources are allocated to different user devices to enable simultaneous and efficient data transmission. NR is essentially a scheduled system where the scheduler in the gNB controls downlink and uplink transmissions. This paper describes the details around dynamic scheduling, including associated functionality such as buffer-status report and power-headroom reports.

Simulation of Coherent Electromagnetic Waves in Wavelength Division Multiplexing (WDM) Transmission

This study analyzes the application of Wavelength Division Multiplexing (WDM) in fiber optic networks which aims to find the wavelength, WDM optical spectrum and modes, as well as the CPR estimated phase and modes. In this study WDM allows the simultaneous transmission of different data streams through a single optical fiber, using different wavelengths. This research was conducted using the python OptiCommPy module. This module is used to perform modeling of complex optical fiber transmission systems by considering the various parameters and disturbances involved in optical transmission. The results obtained from this study are that WDM networks can use full or limited wavelength conversion, depending on the wavelength conversion capability of each network node. Whereas multifiber networks use fiber pools between network nodes, and multifiber WDM networks can be implemented without or with full wavelength conversion. This research can be a guide for designing coherent electromagnetic waves in WDM transmissions using the OptiCommPy python module.

Microwave wireless power transfer system using a dual-dielectric resonator oscillator

Non-radiating wireless power transfer (WPT) systems have found extensive applications in science and technology. This paper reports the design, simulation, and implementation of a compact single-port (DC to RF) WPT system composed of two coupled dielectric resonators (DR). The DR on the transmitter side, in combination with a transistor amplifier and a series feedback circuit, forms a dielectric resonator oscillator for microwave power generation. The DR on the receiver side is coupled to the transmitter DR such that the circuit can be considered as a dual-dielectric resonator oscillator or DDRO. The DDRO is designed for optimum power transfer to the output port. The measured RF output power of the proposed WPT system at 7.5 GHz for a 10 mm spacing between the transmitting and receiving DR is measured to be 13.07dBm at a DC voltage of 3.3 V and a supply current of 32.3 mA, which shows a good agreement with our proposed method of analysis. The available bandwidth at the operating frequency of 7.5 GHz is measured to be 150 MHz which provide a relatively wide bandwidth for simultaneous data transmission.

Resource allocation and BER performance analysis of NOMA based cooperative networks

Resource sharing and management can significantly improve the performance and spectral efficiency of wireless systems. In power domain non-orthogonal multiple access (NOMA) systems, users share a common bandwidth for simultaneous data transmission and therfore, the spectral efficiency of the system will be improved at the expense of increased complexity. Provided proper power allocation, it is possible to detect symbols at receivers. In this paper, the downlink of a cellular system is considered where a base station (BS) communicates with two users using NOMA with the assistance of a decode-and-forward (DF) relay. In the proposed scheme, receivers combine received signals from direct and cooperative links, and decode symbols by employing successive interference cancellation (SIC). The bit error rate (BER) performance of the proposed scheme is analyzed and the optimal power allocation is also derived through a Min–Max optimization, and a closed form approximate solution is proposed for binary phase shift keying (BPSK) modulation. Furthermore, it is proved that the proposed receiver achieves full diversity order for all users for proper choice of power allocation. Simulation results also corroborate BER and diversity analysis.

Ethernet Over Coaxial (EoC) Cable Telemetry Over High Voltage Dc And High Power Ac For Airborne Sonar Applications


 
 
 We have proposed a new passive component-based coupling scheme to simultaneously transmit high power AC, high voltage DC and high speed data through a long, single core coaxial cable, particularly for Airborne Sonar applications. This method is intended to replace the bulky multicore cables with single core coaxial cables that are compact and effective for transmitting data over long distances. This coupling scheme consists of three couplers to superimpose high power AC, high voltage DC and high speed data at the onboard end of the cable, and three decouplers to separate them at the remote end. The long cable, couplers, decouplers and the acoustic transducer are represented by their corresponding equivalent circuits that are cascaded together to construct the complete network. Power loss in the circuit is minimised by providing impedance matching networks in the form of a T-network transmission line and a tuning coil. The Ethernet over Coaxial (EoC) module can transmit high speed Ethernet data at the rate of 10/100 Mbps for telemetry from onboard to remote units and vice versa. DC voltages up to 300 V are coupled to the single core coaxial cable from the onboard unit and superimposed with high power AC signals and high-speed data. Passive filter-based coupling and decoupling schemes are demonstrated. Network simulation studies and experimental studies are carried out to verify and validate the equivalent circuit model. The transfer functions of each set of couplers and decouplers are determined independently as well as collectively and their effects on the underwater acoustic performance of the system are studied. The model resuls are found to agree with experiments. The proposed system is capable of generating an acoustic Source Level of about 195 dB with the supply of 125 V continuous wave (CW) AC signals, with simultaneous transmission of data at 10 Mbps and DC supply of 260 V from the on-board unit to the remote unit at the end of a coaxial cable of 200 m length. Introduction of impedance matching network is found to increase the source level by about 12 dB.
 
 

A Simultaneous Power and Data Transmission Technology Based on Coil Multiplexing in Domino-Resonator WPT Systems

To achieve parallel power and data transmission in domino-resonator wireless power transfer (WPT) systems, a novel simultaneous power, and data transfer (SPDT) technology based on coil multiplexing is proposed in this letter. Benefiting from the magnetic field characteristics of the bipolar coil structure, the power and data can be injected into multiplexed coils with different flow directions, leading to opposite induced voltage polarities in each coupling coil. Subsequently, a corresponding resonator circuit is developed to form independent power and data resonance loops. In addition, an injected data transmission scheme is developed for domino-resonator WPT systems. Compared with traditional SPDT methods, additional wave trappers and coupling structures are avoided by this proposed technology, and the interference between power and data transfer is significantly eliminated. A 23.6 W laboratory prototype with five domino resonators is built to validate the feasibility of this proposed technology. The experimental results show that the power transfer efficiency reaches 70% at 50 kb/s data transfer rate.

Simultaneous Power and Data Transmission Using Combined Three Degrees of Freedom Modulation Strategy in DC–DC Converters

Power and signal dual modulation (PSDM) modulates both power and data at the same time, making it an appropriate communication method for power electronics’ applications. While the conventional PSDM schemes use either duty cycle control or phase/frequency control of the gate signal for switching devices, which achieve limited bitrate performances, this article proposes a novel PSDM scheme that combines the control of the three degrees of freedom (DoF) to further improve the bitrate. The scheme's feasibility is shown by examining the compatibility between the control of different DoFs from the perspective of communication. Then, a practical scheme is determined based on the analysis of the influence between signal carriers with different frequencies and the upper limit of M-ary modulation for each carrier. Finally, a 230 W experimental prototype, which achieves independence between power and communication control as well as a bitrate of 41.7 kb/s under the switching frequency of 100 kHz/83.3 kHz, demonstrates the correctness of the proposed scheme and the pertinent theoretical analysis.

Impedance Matching Network of Passive Coupler with Coaxial Cable for Airborne Sonar Applications

A design methodology is proposed to implement an impedance-matching network in a high-power underwater acoustic transmitting system to minimize power loss through long cables. For this, a Lumped-parameter electrical equivalent circuit model has been developed to analyze the transmitting system along with various couplers and de-couplers introduced for simultaneous transmission of data and DC power along with high-power AC. The effects of these couplers on the end performance of the system have been studied and compensated for by suitably modifying the impedance matching lines (ML). The appropriate impedance matching lines significantly enhance the power by about 300 watts and improve the power factor to 100 %.